step by step guide on the production of liquid soap

CHEMICALS AND THEIR
FUNCTIONS..(1).Nitrosol:Is a thicken agent..
(2)Water Soluble Colour:To add colour to your
production..(3).Formalin:Is a preservative
agent..(4).Caustic Soda:Is a stain remover..
(5).Soda Ash:It regulates Caustic Soda..
(6).Sulphonic Acid:Is a foaming agent..(7).Perf
ume:Is a fragrance,it give your production nice
scent..CHEMICAL FORMULATION..Please your
soda Ash and Caustic Soda MUST be diluted in
water for 24hrs before usage for effective
result.To balance your caustic soda & Soda Ash
(Measure One unit of your soda Ash into a
container and add 4 units of water,leave for
24hours,the same step is applicable to your
Caustic Soda.You can use anything as your
measurement unit. PROCESS: Measure 50units
of clean water into a clean bucket,add One unit
of Natrosol into the water,Dissolve 1/10 of your
colour in small quantity of water and pour into
the water in the bucket and stir well.Dissolve 1/
10 of Formalin in a small container pour it into
the mix and stir,add two units of balanced
Caustic soda into the mixture and stir well,pour
two units of balanced Soda Ash to the mixture
and stir well,pour 3units of Sulphonic Acid to
the mixture,Dissolve 1/10 of your perfume into
small quantity of water,now pour the perfume
into the mixture.Stir very well.At this stage you
have successfully produce liquid soap.It is
advisable to use lemon fragrance,also note the
steps these chemicals are arranged it is very
important to follow the steps, if you use number 2 for number 5, your production
can lead to
another thing please note.Also get hand
glove,avoid body contant with these
chemical,wash immediatly with water if body
contant occur.The end result will be a liquid soap that cleanses and foams very well. In my next post, I will give you a step by step guide on the production of antiseptic soap.